Iron and Manganese Softening in Jennings, KS

Iron and Manganese Softening in Jennings, KS

Iron and manganese softening in Jennings, KS handles water that stains as well as scales. Orange rings in the toilet and tub point to iron. Black or brown specks point to manganese. A standard softener can remove small amounts of both in their dissolved form, if it's set up correctly.

Jennings, KS Water Softener Installation starts by testing iron and manganese in parts per million. Most softeners handle up to a few ppm of clear-water ferrous iron. Above that, or if the iron is already rusty when it comes out of the tap, a softener alone will foul. That's when a dedicated iron filter belongs in front of it, and we'll say so.

Within softener range, we adjust the setup:

• Add iron to the hardness setting, about 4 gpg per ppm of iron
• Shorten the time between regenerations so iron doesn't build up on the resin
• Use a resin cleaner or iron-out salt to strip deposits during regeneration
• Choose a fine-mesh resin that holds up better on iron

We also check the brine tank and injector, since iron sludge can clog both. Regular resin cleaning keeps the bed from turning orange and losing capacity.

For iron and manganese softening in Jennings, KS, call Jennings, KS Water Softener Installation at (833) 995-0133.